Products Information: Weatherproof Silicone Sealant 002
NEUTRAL WEATHER PROOFING SILICONE SEALANT
For all kinds of marble, granite, cement material excellent cohesiveness, hou resistance.
Products formed after curing cold resistant, heat resistant, no corrosion of the elastomer, excellent weather resistance, anti-aging, resistance to ultraviolet radiation, ozone and high and low temperature resistance, no pollution to the environment.
Product Characters:
1, one-component, neutral curing, for all kinds of stone, concrete, and most of the plastic without non-corrosive pollution-free.
2, for all kinds of marble, granite, concrete material has excellent cohesiveness, hou resistance.
3, products formed after curing cold resistant, heat resistant, no corrosion of the elastomer, excellent weather resistance, anti-aging, resistance to ultraviolet radiation, ozone and high and low temperature resistance, no pollution to the environment.
Main Uses:
1, high quality, high-level building silicone glue, structural assembly specifically designed for weather resistance packing.
2, one-component, may at any time used in silicone rubber formula has reached international standards.
3, are widely used in glass curtain wall, stone curtain wall, aluminum curtain wall engineering, etc.
4, excellent weathering resistance, performance within the range - 50 ℃ to 100 ℃ changed little, uv resistant, resistant to ozone.
Restriction:
1, the sealant construction sites to pay special attention to maintain good ventilation environment;
2, such as eyes eyes to that of the curing adhesive contact, wash immediately with plenty of water and seek help from a doctor;
3, only to the products of the company is in line with the quality requirements, to ensure that the products in use process for any accident or improper use shall not be liable for any loss caused.
Technical Data
The following data is for reference,is not suggested to make standard.
ITEMS | DATA | |||
Sag degree, mm | upright | 1 | ||
parallel | 1 | |||
extrudability, ml / min. | 230 | |||
tack-free time, min | 12 | |||
recovery of elastic, % | 85 | |||
Hardness shore A |
24h | 14 | ||
7d | 21 | |||
specific gravity, g/ml | 0.99 | |||
Depth of curing, mm | 24h | 3 | ||
7d | 6 | |||
Adhesion properties , % | 14 | |||
cohesion properties at 23℃ |
tensile modulus(MAX), Mpa | 1.48 | ||
elongation at break, % | 376.2 | |||
105℃ volatile content, % |
14 |